MOZA FMP18 Panel Bundle
Two DDIs, an AMPCD and the FPP module in one setSquare 7.1-inch displays, 800 × 800 at 60 Hz95 buttons, 16 rotary controls, 7 togglesMagnetic bezels come off in one movementDesk clamp plus 75 × 75 mm VESA on every module

MOZA FMP18 Panel Bundle — fighter front-panel kit: three 7.1-inch 800 × 800 displays, 95 buttons, desk clamp

Payment methods
Set contents2 × DDI, AMPCD, FPP moduleDisplays3 × square, 7.1-inchResolution and refresh800 × 800, 60 HzControls95 buttons, 16 rotaries, 7 togglesUSB polling1000 HzWeight5.4 kg

About this product

All specifications →
In the box
FPP module × 1; Screens × 3; DDI magnetic bezels × 2; AMPCD magnetic bezel × 1; Angle-adjustable desk clamp × 1; Mounting plate set; USB 3.0 Type-A cables, 1.5 m × 3; USB Type-C cable, 1.5 m × 1
Compatibility
PC, configured in MOZA Cockpit: assign the left, centre and right displays and remap every button and rotary. All three modules — DDI, AMPCD and FPP — carry a 75 × 75 mm VESA pattern for M4 × 10 mm screws, so they fit the included clamp as well as third-party brackets, aluminium profile, wall mounts and suspended rigs. Removing a magnetic bezel frees the screen for other duties — civil-aviation instruments, or a different fighter.

MOZA FMP18 Panel Bundle: description and configuration

MOZA FMP18 Panel Bundle.

The FMP18 Panel Bundle is a complete front instrument panel set for combat flight simulation. It brings two multifunction DDI displays, the lower AMPCD and the FPP control module: together they reproduce the layout and the control logic of a classic carrier-based fighter's front panel.

Each screen is square, with a 7.1-inch active area at 800 × 800 and a 60 Hz refresh rate. That square format is what sets the set apart from ordinary rectangular solutions: the image is not cropped and keeps the proportions of the real instrument. The magnetic button bezels attach to the displays over pogo-pin contacts and come off in one movement; with the bezel removed, a screen can be used on its own — for civil-aviation instruments or for a different combat aircraft.

Controls run to 95 buttons, 16 rotary controls and 7 toggle switches, all with distinct tactile feedback. Display brightness has 10 steps, button and knob backlighting 15. Every module carries a standard 75 × 75 mm VESA pattern on the back for M4 × 10 mm screws, and the included clamp changes the viewing angle with a single M8 wrench without taking anything apart. Key mapping and the left/centre/right display assignment are set in MOZA Cockpit. Platform is PC, with a 1000 Hz USB polling rate.

The whole front panel, not pieces of it

The set brings two DDIs on the flanks, the AMPCD below and the FPP control module in the centre — the entire front instrument panel at once. Its layout and control logic follow a classic carrier fighter's cockpit, so there is no building it up module by module and hunting for matching brackets.

MOZA FMP18 Panel Bundle assembled, front view: two DDIs on the flanks, the AMPCD below and the FPP module in the centre

MOZA FMP18 Panel Bundle assembled, front view: two DDIs on the flanks, the AMPCD below and the FPP module in the centre

Square screens instead of cropped ones

A combat aircraft's instruments are square, and so are these screens: a 7.1-inch active area at 800 × 800 and 60 Hz. The map, the radar and the systems pages appear in the right proportions, with no letterboxing and no stretched image as on rectangular displays. The full panel measures 7.5 inches; 7.1 inches remain viewable once the magnetic bezel is fitted.

Close-up of a MOZA FMP18 square screen with the colour moving map on the AMPCD

Close-up of a MOZA FMP18 square screen with the colour moving map on the AMPCD

Magnetic bezels and modularity

The button bezels are held by magnets and joined to the screen through pogo-pin contacts: off and back on in one movement, no screws. Without the bezel a screen becomes a plain display — hand it to a civil aircraft's instruments or another combat type, and combine the FPP module, the screen and the bezel in any arrangement you like.

MOZA FMP18 magnetic bezels lifted off the screens, showing the pogo-pin separation

MOZA FMP18 magnetic bezels lifted off the screens, showing the pogo-pin separation

118 controls under your fingers

95 buttons, 16 rotary controls and 7 toggle switches, each with distinct tactile feedback, so a press registers without looking down. Lighting is set separately: 10 steps for the screens and 15 for the buttons and knobs, from daylight legibility to a comfortable night minimum.

MOZA FMP18 at three-quarter angle: the buttons around the screens and the FPP module's rotaries and toggles

MOZA FMP18 at three-quarter angle: the buttons around the screens and the FPP module's rotaries and toggles

Mounting without rework

The included clamp fixes to the desk edge and changes the angle with a single M8 wrench — no need to take the panel off. For a permanent cockpit, every module has a 75 × 75 mm VESA pattern on the back for M4 × 10 mm screws: aluminium profile, wall and suspended brackets and other MOZA panels all fit.

Rear of the MOZA FMP18: the 75 × 75 mm VESA patterns on the modules and the desk clamp

Rear of the MOZA FMP18: the 75 × 75 mm VESA patterns on the modules and the desk clamp

What is in the box

The kit ships complete: the FPP module, three screens, two DDI bezels, the AMPCD bezel, the angle-adjustable clamp and a mounting plate set. The cables are in the box too — three 1.5 m USB 3.0 Type-A and one 1.5 m USB Type-C. Nothing extra to buy before the first flight.

MOZA FMP18 kit contents: the FPP module, three screens, two DDI bezels, the AMPCD bezel, the clamp and the mounting plates

MOZA FMP18 kit contents: the FPP module, three screens, two DDI bezels, the AMPCD bezel, the clamp and the mounting plates

MOZA FMP18 Panel Bundle specifications

Kit contents
FPP module
1
Screens
3
DDI bezels
2
AMPCD bezel
1
Angle-adjustable clamp
1
Mounting plate set
Included
Displays
Active area
7.1-inch, square
Full panel size
7.5-inch; 7.1-inch viewable with the magnetic bezel fitted
Resolution
800 × 800
Refresh rate
60 Hz
Brightness steps
10 levels
Controls and lighting
Buttons
95
Rotary controls
16
Toggle switches
7
Button and knob backlight
15 levels
Bezel attachment
Magnetic with pogo-pin contact, removable without tools
Build, mounting and connectivity
Dimensions
527 × 456 × 212 mm (including the clamp)
Material
Composite materials
Weight
5.4 kg
Connection ports
USB 3.0 Type-A × 3, USB Type-C × 4
USB polling rate
1000 Hz
Module mounting
75 × 75 mm VESA on the DDI, AMPCD and FPP, M4 × 10 mm screws
Angle adjustment
Clamp, a single M8 wrench, nothing to disassemble
Compatibility and software
Platform
PC
Software
MOZA Cockpit
Display assignment
Left, centre and right assigned manually
Mapping
Full button and rotary mapping
Identifiers
Model code
AS027
EAN
6973137271527
UPC
850083320102

Reviews

There are no customer reviews yet. The first review will appear after a verified order.

No reviews yet — be the first to leave one.

Questions and answers

No questions yet. Ask the first one and we will reply within one business day.

No questions yet — be the first to ask.

Chat

Sign in to GEEKSHOP

Enter your number and we will send a six-digit code.

SMS codes are available for Uzbekistan phone numbers.

The code was sent and remains valid for five minutes.

Sign in with Telegram

By continuing, you accept the Public Offer, Privacy Policy and Geek Coins program terms.