MOZA GS V2P GT Wheel
300 mm rim in 5 mm forged carbon fibre28+ controls within reachDual clutch on non-contact Hall sensors10 RGB rev LEDs in 8 coloursAll-aluminium MOZA quick release

MOZA GS V2P GT Wheel — sim racing wheel: 300 mm, forged carbon, 28+ controls

Payment methods
Diameter300 mmFormatGT rimPaddles2 + 2 (dual clutch)Controls28+Rev LEDs10 RGB, 8 coloursMountingall-aluminium MOZA quick release

About this product

All specifications →
In the box
MOZA GS V2P GT Wheel × 1; Toolkit × 1; MOZA sticker
Compatibility
The rim fits MOZA bases with the wired conductive slip ring: R3, R5, R9 V2 and R9 V3, R12 V2, R16 V2, R21 V2, R21 Ultra and R25 Ultra. It does not work with the earlier wireless R9 V1, R16 V1 and R21 V1 bases. Mounting is MOZA's all-aluminium quick release. Buttons, colours and rev LEDs are configured in the MOZA Pit House app for PC; console support depends on the base, so check with a GEEKSHOP manager. Suited to Assetto Corsa Competizione, iRacing, F1, rFactor 2 and other sims.

MOZA GS V2P GT Wheel: description and configuration

MOZA GS V2P GT Wheel.

The MOZA GS V2P is a 300 mm GT-format rim built for serious sim racing — Assetto Corsa Competizione, iRacing, rFactor 2 and formula titles. It is the upgraded revision of the GS: MOZA shrank the quick release and added a strip of 10 sequential RGB rev LEDs. The rim and face plate are 5 mm forged carbon fibre, the back plate is carbon-fibre-reinforced composite, and the grips are wrapped in perforated microfibre leather.

The wheel carries 28+ programmable controls: 10 backlit mechanical buttons, 5 rotary encoders, 2 depressible thumb encoders and 2 universal joysticks. That is enough to change brake bias, traction control and engine maps, and to walk through menus, without taking your hands off the rim. The shift and dual-clutch paddles are 3 mm forged carbon fibre running on non-contact Hall sensors; the dual clutch supports three modes — combined axis, independent axis and button.

Button backlighting and the rev strip are configured in MOZA Pit House: 8 colours, LED display modes and shift-light timing. The rim mounts on MOZA's all-aluminium quick release and works with bases that use the wired conductive slip ring: R3, R5, R9 V2 and V3, R12 V2, R16 V2, R21 V2, R21 Ultra and R25 Ultra. It is not compatible with the earlier wireless R9 V1, R16 V1 and R21 V1 bases, so check your base revision before ordering.

Forged carbon where it actually works

The GS V2P rim and face plate are moulded from 5 mm forged carbon fibre, which gives the torsional stiffness a direct-drive base demands: motor force reaches your hands without soggy flex in between. The paddles use the same material at 3 mm, and the back plate is carbon-fibre-reinforced composite. The grips are wrapped in perforated microfibre leather that stays put under a damp palm on a long stint.

MOZA GS V2P on a dark background with button backlighting and rev LEDs lit

MOZA GS V2P on a dark background with button backlighting and rev LEDs lit

28+ inputs, hands stay on the rim

The layout is built around a race, not a spec sheet: 10 backlit mechanical buttons, 5 rotary encoders, 2 depressible thumb encoders and 2 universal joysticks. Brake bias, TC, engine map, radio and the pit menu get assigned once in MOZA Pit House, and after that everything is changed blind. The buttons are mechanical with a clear click, so a press registers even through gloves.

Three-quarter studio shot of the MOZA GS V2P: carbon rim and backlit buttons

Three-quarter studio shot of the MOZA GS V2P: carbon rim and backlit buttons

A dual clutch on Hall sensors

The lower pair of paddles acts as a dual clutch and supports three modes: combined axis, independent axis and plain button. In iRacing and F1 that buys you a repeatable launch — one paddle sets the bite point, the other releases the clutch. All four paddles ride on non-contact Hall sensors: no mechanical contact, so no bounce, no worn contact pad, and the same travel hundreds of races later.

Close-up of the MOZA GS V2P rear: four paddles and the quick-release mechanism

Close-up of the MOZA GS V2P rear: four paddles and the quick-release mechanism

A rev strip you catch out of the corner of your eye

Ten high-brightness RGB LEDs sit along the top of the face plate and light up sequentially with engine revs. Eight colours, display modes and shift-light timing are all set in MOZA Pit House per car, so the shift point always lands at the same spot on the strip whatever you are driving. Button backlighting is configured separately: split functions by colour and you find the right button without reading the label.

MOZA GS V2P at three-quarters: five rotary encoders and the joysticks on the face plate

MOZA GS V2P at three-quarters: five rotary encoders and the joysticks on the face plate

Check your base revision first

The GS V2P communicates through a wired conductive slip ring, so it needs a matching base generation: R3, R5, R9 V2 and V3, R12 V2, R16 V2, R21 V2, R21 Ultra or R25 Ultra. The earlier wireless R9 V1, R16 V1 and R21 V1 bases use a different transmission system and will not drive this rim. The quick release itself is all aluminium and was made more compact on the V2P; swapping the wheel on or off takes a couple of seconds and no tools.

Rear of the MOZA GS V2P: the aluminium quick release and carbon shift paddles

Rear of the MOZA GS V2P: the aluminium quick release and carbon shift paddles

MOZA GS V2P GT Wheel specifications

Main
Device type
detachable sim racing wheel, GT format
Model code
RS056
Rim diameter
300 mm, standard racing wheel size
Intelligent telemetry
supported
Software
MOZA Pit House
Materials
Rim & face plate
forged carbon fibre, 5 mm
Back plate
carbon-fibre-reinforced composite
Shifter paddles
forged carbon fibre, 3 mm
Grips
perforated microfibre leather
Controls
Programmable inputs
28+
Luminous mechanical buttons
10
Rotary encoders
5
Thumb encoders
2, depressible
Universal joysticks
2
Shift paddles
2, magnetic
Clutch paddles
2
Paddle sensor
non-contact Hall sensor
Dual clutch modes
combined axis / independent axis / button
Lighting
RGB rev LEDs
10, sequential strip
Colour choices
8
Rev LED configuration
fully adjustable in MOZA Pit House
Mounting & package
Release method
all-aluminium MOZA quick release
Package size
36.6 × 23 × 15 cm
Package weight
3 kg
EAN
6973137270223
UPC
850062761070

Reviews

There are no customer reviews yet. The first review will appear after a verified order.

No reviews yet — be the first to leave one.

Questions and answers

No questions yet. Ask the first one and we will reply within one business day.

No questions yet — be the first to ask.

Chat

Sign in to GEEKSHOP

Enter your number and we will send a six-digit code.

SMS codes are available for Uzbekistan phone numbers.

The code was sent and remains valid for five minutes.

Sign in with Telegram

By continuing, you accept the Public Offer, Privacy Policy and Geek Coins program terms.