MOZA mBooster Base Plate — steel mounting plate for mBooster and CRP/CRP2 pedals
Payment methodsAbout this product
All specifications →MOZA mBooster Base Plate: description and configuration
MOZA mBooster Base Plate.
The mBooster Base Plate is MOZA's own steel foundation for the mBooster Active Pedal and the CRP pedal family. An active pedal generates real push-back force, so it needs a genuinely rigid mount: on a soft or flexing base part of that force is lost to deflection and the brake stops feeling the same lap after lap.
The plate is made from high-strength steel. Holes for CRP pedals are already drilled, so a CRP/CRP2 set bolts straight onto the plate and pairs with the mBooster without any modification. The hole grid and the cross slots let you set pedal position to suit your seating, and the design also supports multi-unit mBooster Active Pedal builds.
The plate fastens to a cockpit or rig with 4–6 M8 bolts, and it is compatible with MOZA's inverted pedal mounting bracket. Before ordering, check that your rig has suitable M8 mounting points, and confirm the hardware set for your specific frame with a GEEKSHOP manager.
An active pedal needs a rigid mount
The mBooster Active Pedal does not only read force — it creates it, simulating ABS, wheelspin and engine vibration. All of that force goes into the base. If the pedals sit on a thin sheet or a soft structure, part of the travel turns into frame flex and the brake's bite point drifts. The steel mBooster Base Plate removes that variable: the force goes into the rig instead of into deflection.
Black steel MOZA mBooster Base Plate from above: slots, hole grid and heel area
CRP2 and mBooster side by side, no rework
Holes for CRP pedals are drilled at the factory, so an "mBooster on the brake plus CRP2 on the throttle" layout assembles on one plate with standard hardware. No new holes to drill, no adapters to hunt down, no cutting rig profile. The plate sets the correct relative pedal position straight away.
MOZA mBooster Base Plate with a pedal set fitted, front view (pedals sold separately)
A hole grid that fits your seating
Two cross slots and a dense hole grid give room to set pedal spacing and fore-aft position. A stretched-out formula seating position and an upright GT one need different geometry — the plate lets you dial it in once and lock it. The integrated heel area helps keep a steady footing under heavy braking.
MOZA mBooster Base Plate at three-quarter angle: corner mounting feet and the cross pedal slots
Bolt it into the rig and you are done
The plate pulls down onto the cockpit with 4–6 M8 bolts — standard for aluminium profile and most steel rigs. MOZA's inverted pedal mounting bracket is supported too, if you are building a formula layout. And if you plan to expand, the design accommodates several mBooster active pedals on one plate.
mBooster and CRP2 on the MOZA plate at three-quarter angle, with the M8 bolt feet visible (pedals sold separately)
MOZA mBooster Base Plate specifications
Reviews
There are no customer reviews yet. The first review will appear after a verified order.
No reviews yet — be the first to leave one.
Questions and answers
No questions yet. Ask the first one and we will reply within one business day.
No questions yet — be the first to ask.
