SHARGE Disk Pro 2 Ultra
Your own M.2 NVMe SSD up to 8 TB, swapped in half a minute6 ports: 2× USB-C, USB-A, HDMI, SD and microSDHDMI 2.1: 4K at 144 Hz or 8K at 30 HzA 12,000 RPM fan with three cooling modes

SHARGE Disk Pro 2 Ultra — a 6-in-1 hub with a swappable M.2 SSD, 10 Gbps and 8K HDMI, Yellow

Colour: Yellow
Store pickup
Tashkent, Shaykhantakhur district, Iftikhor street, 2
Courier
50,000 UZS
Warranty
1 month
Payment methods
Interfaceup to 10 Gbps (USB 3.2 Gen 2)DriveM.2 NVMe up to 8 TB (sold separately)Video outHDMI 4K@144Hz / 8K@30HzPorts6PowerPD 100 W in / 80 W outCoolingFan up to 12,000 RPM

About this product

All specifications →
In the box
Disk Pro 2 Ultra — 1 pc; Magnetic sheet — 1 pc; Screwdriver — 1 pc; Screws — 2 pcs; User manual
Compatibility
Works with USB-C iPhone models, Android phones that support USB-C/OTG, and laptops and tablets with USB-C. The M.2 NVMe drive is bought separately: 2230, 2242 and 2280 modules with a B&M key up to 8 TB fit, but double-sided or unusually thick SSDs and models with non-removable heatsinks may not. The 1.5 W minimum draw lets it run off a phone with no external power; for long writes and video output it is better to feed power into the PD-in port.

SHARGE Disk Pro 2 Ultra: description and configuration

SHARGE Disk Pro 2 Ultra.

The SHARGE Disk Pro 2 Ultra is both an enclosure for an M.2 NVMe drive and a six-port hub in a body the size of a playing card: 92.6 × 59.2 × 13.5 mm, about 72 g. It magnetically attaches to the back of a phone or sits beside a laptop, and a detachable lanyard cable replaces the soldered-in cable of the previous generation. It is built for people who shoot on a camera or phone and sort the footage on the move.

You fit your own M.2 NVMe drive in the 2230, 2242 or 2280 format with a B&M key, up to 8 TB. A single Torx screw holds the shell, and the screwdriver and screws are in the box, so a swap takes about half a minute. The USB 3.2 Gen 2 interface runs at up to 10 Gbps (around 1,050 MB/s): SHARGE measures 100 photos in roughly 5.5 seconds and a 70 GB game file in about 76 seconds. To keep speed from sagging during long jobs, a fan spins at up to 12,000 RPM with AUTO, TURBO and OFF modes.

The port set: two USB-C (one host port delivering up to 80 W of PD, one 10 Gbps data port accepting up to 100 W of PD in), USB-A 3.0, HDMI, plus SD 3.0 and microSD 3.0 slots. On the Ultra, HDMI 2.1 outputs 4K at 144 Hz or 8K at 30 Hz, cards read at up to 180 MB/s and write at up to 120 MB/s, and minimum power draw is 1.5 W — useful when the hub hangs off a phone with no external power. The drive itself is not included; double-sided or unusually thick SSDs and modules with non-removable heatsinks may not fit.

A hub the size of a playing card

The 92.6 × 59.2 × 13.5 mm body weighs about 72 g and slips into a jeans pocket or the side compartment of a backpack. Magnetic mounting holds it on the back of a phone, and a metal sheet is included for models without a magnet ring.

The cable is no longer soldered in as on the first Disk Pro: the short USB-C lanyard detaches, so you can swap it for any cable of the length you need.

SHARGE Disk Pro 2 Ultra attached to the back of a phone and connected with the yellow cable

SHARGE Disk Pro 2 Ultra attached to the back of a phone and connected with the yellow cable

Your drive, your capacity

The Disk Pro 2 Ultra ships without a drive: you fit your own 1, 2, 4 or 8 TB M.2 NVMe and pay the market price for memory instead of a pre-built bundle. Boards in 2230, 2242 and 2280 with a B&M key are supported.

One Torx screw holds the shell: open the cover, drop the board in, tighten the screw — about thirty seconds. The screwdriver and spare screws are already in the box. Double-sided or unusually thick SSDs, and modules with non-removable heatsinks, may not fit — worth checking before you buy memory.

SHARGE Disk Pro 2 opened up: fitting an M.2 NVMe SSD in 2230, 2242 or 2280

SHARGE Disk Pro 2 opened up: fitting an M.2 NVMe SSD in 2230, 2242 or 2280

A fan instead of throttling

Compact NVMe enclosures usually heat up and throttle on large files. This one has a fan running at up to 12,000 RPM with three modes: AUTO adjusts itself, TURBO holds maximum airflow through a long offload, and OFF silences it when you need quiet.

In SHARGE's own measurements the enclosure kept the drive below 45 °C, and a thermal test after 15 minutes of sustained read/write peaked at 35.1 °C.

SHARGE Disk Pro 2 cooling: a fan up to 12,000 RPM with Turbo, Auto and Off modes

SHARGE Disk Pro 2 cooling: a fan up to 12,000 RPM with Turbo, Auto and Off modes

10 Gbps: less waiting at the laptop

The USB 3.2 Gen 2 interface runs at up to 10 Gbps — around 1,050 MB/s. SHARGE measures a hundred photos in roughly 5.5 seconds and a 70 GB game file in about 76 seconds; over a 5 Gbps link the same hundred shots would take around 12 seconds.

Real speed depends on the SSD you install and the host port, so a USB 3.2 Gen 2 or faster port is needed for the maximum.

SHARGE Disk Pro 2 speed: 10 Gbps, 100 photos in about 5.5 seconds, 70 GB in about 76 seconds

SHARGE Disk Pro 2 speed: 10 Gbps, 100 photos in about 5.5 seconds, 70 GB in about 76 seconds

Ultra or Lite: the difference

The body, ports, fan and SSD bay are identical on both versions. The Ultra differs in three ways: HDMI 2.1 with 4K at 144 Hz and 8K at 30 Hz instead of HDMI 2.0 with 4K at 60 Hz, a faster card reader (up to 180 MB/s read and 120 MB/s write versus 100 and 90 MB/s), and a 1.5 W minimum draw instead of 5 W.

That last point matters most in practice: at 1.5 W the hub runs more reliably straight off a phone when there is no outlet nearby.

SHARGE Disk Pro 2 Lite versus Ultra: HDMI, card speeds and minimum power draw

SHARGE Disk Pro 2 Lite versus Ultra: HDMI, card speeds and minimum power draw

SHARGE Disk Pro 2 Ultra specifications

Main
Type
6-in-1 hub with an SSD bay
Dimensions
92.6 × 59.2 × 13.5 mm
Weight
about 72 g (without an SSD)
Body
Semi-transparent with yellow accents
Mounting
Magnetic, with a metal sheet included
Lanyard
Detachable USB-C lanyard cable
Storage
Supports
M.2 NVMe (B&M key)
Form factors
2230 / 2242 / 2280
Max capacity
up to 8 TB
Interface speed
up to 10 Gbps, about 1,050 MB/s
Drive swap
One Torx screw, screwdriver included
SSD included
No, purchased separately
Ports and video
USB-C
2 pcs: a host port with up to 80 W PD out and a 10 Gbps data port with up to 100 W PD in
USB-A
1 pc, USB 3.0
HDMI
HDMI 2.1: 4K at 144 Hz or 8K at 30 Hz
Card reader
SD 3.0 and microSD 3.0
Card speeds
read up to 180 MB/s, write up to 120 MB/s
Cooling and power
Fan
up to 12,000 RPM
Cooling modes
AUTO / TURBO / OFF
Test result
max 35.1 °C after 15 minutes of sustained read/write (SHARGE data)
Minimum power draw
1.5 W
Compatibility
Devices
USB-C iPhone models, Android phones with USB-C/OTG, laptops and tablets with USB-C
SSD limits
Double-sided, unusually thick SSDs and modules with non-removable heatsinks may not fit

Reviews

There are no customer reviews yet. The first review will appear after a verified order.

No reviews yet — be the first to leave one.

Questions and answers

No questions yet. Ask the first one and we will reply within one business day.

No questions yet — be the first to ask.

Chat

Sign in to GEEKSHOP

Enter your number and we will send a six-digit code.

SMS codes are available for Uzbekistan phone numbers.

The code was sent and remains valid for five minutes.

Sign in with Telegram

By continuing, you accept the Public Offer, Privacy Policy and Geek Coins program terms.