MOZA HGP Shifter — H-pattern sim racing shifter: 7+R gears, 15-bit sensor, CNC aluminium
Payment methodsAbout this product
All specifications →MOZA HGP Shifter: description and configuration
MOZA HGP Shifter.
The MOZA HGP Shifter is an H-pattern gearbox for sim racing, built for drivers who run GT3, touring, rally and truck cars with a real manual gate. The whole body is CNC machined from anodised aviation-grade aluminium, so the lever stays planted and does not wander even during fast shifts.
The gate gives seven forward gears and reverse. Reverse and 7th engage only when the lever is pushed down, so they cannot be selected by accident. A 15-bit non-contact angle sensor reads the lever position, and the patented mechanism with a shock-absorbing damper makes every shift crisp and smooth. The patented intelligent downshift throttle blip system is switched on and tuned in MOZA Pit House, so heel-and-toe technique is optional.
It connects straight to a PC over USB-B, or to a MOZA wheelbase with a shifter port over RJ11 — both cables are included. It measures 100 × 140 × 250 mm, weighs 1.8 kg and bolts down through M6 threaded holes, so it fits most cockpits. A desk clamp for table setups is sold separately, and the shift knob can be swapped for any one with a standard thread.
Seven gears and a proper lockout
The gate is laid out for seven forward gears and reverse. Reverse and 7th are protected against accidental selection: you push the lever down first, and only then does it drop into the slot. On long ETS2 hauls and in touring cars this removes a whole class of mistakes where sixth turns into seventh or reverse.
Top-down view of the MOZA HGP gate plate with the R and 1-7 gear markings and the ball knob
15 bits, no friction
A non-contact 15-bit angle sensor reads the lever position. There are no wiping contacts to wear out and start skipping gears. The patented shift mechanism also carries a damper, so the impact at the end of the throw is absorbed and each engagement feels solid rather than harsh.
MOZA HGP shifter from the front: slotted gate plate and the MOZA RACING logo on the body
Throttle blip without heel-and-toe
The patented intelligent downshift system blips the throttle for you on the way down the box. The car settles better on corner entry and you do not have to learn heel-and-toe to get there. The system is fully optional: in MOZA Pit House you can enable it, switch it off, or tune it per car and per driving style.
MOZA HGP shifter at three-quarter view: black aluminium body, ball shift knob and mounting base
Two ways to connect
The rear panel carries two sockets: USB-B for a direct PC connection and RJ11 for a MOZA base with a shifter port. Both cables are in the box — 1.8 m of USB and 1.5 m of RJ11. If the base is already busy with pedals and a dash, the shifter can simply hang off a free USB port on the computer.
Rear panel of the MOZA HGP shifter with the RJ11 socket for a base and USB-B for a PC
Swappable knob and a dust cover
The standard knob unscrews and almost any knob with a standard thread goes on in its place — a classic ball, wood, or a resin one. The mechanism itself sits under a patented funnel-shaped cover borrowed from real cars: dust and crumbs stay out of the gate, and the assembly keeps a clean look.
Staged MOZA shot: the removed shift knob floats above the HGP body, showing it is swappable
MOZA HGP Shifter specifications
Reviews
There are no customer reviews yet. The first review will appear after a verified order.
No reviews yet — be the first to leave one.
Questions and answers
No questions yet. Ask the first one and we will reply within one business day.
No questions yet — be the first to ask.
